Top 15 Best Boring Bars In 2019

Boring is a machining technique that endeavors to enlarge a hole after the same has been drilled. It employs a single-point cutting to do the job.

This is crucial as it expedites the joining of various constituent parts and components. Specifically, it aids in cutting the dimensions in some tight tolerance.

These tools find wider applicability in many fields like woodwork, carpentry, metalwork, building and construction, and general repairs.

Owing to this multipurpose nature, the tools yield some fair degree of convenience.

They cut down the time you would naturally take to have your way in a workshop.

That is why you want to make the effort to find the right one for your use.

15 Best Boring Bars

#1: Micro 100, 20-0933, Indexable Right Hand Coolant thru Boring Bar

Micro 100

Intending to handle many kinds of materials? This is the boring bar to place your bet on. It has that distinctive ability to pierce through the soft, medium, and hard materials comfortably.

Coolant-thru Tool-holder

Some coolant-thru tool-holders exist to aid with the handling of the boring bars. These ones are structured to conform to the ANSI standard CCMT style inserts. As such, they are reliable enough to engage in the long run.

Solid Carbide Tools

In all this set of boring bars come in the form of MICRO 100 Solid Carbide Tools. It subsequently exudes micro-grain of excellent quality. This is not to mention that it is tougher and more resilient in the long run.

Exceptional Substrate

Underneath the boring bars are some exceptional substrates. These ones are in classes of their own. That is because they are manufactured through some exclusive treating processes which up the speeds and extend the lives of tools.

Pros
  • Tough and resilient enough for long term applications

  • Manufactured by a reputable brand

  • Bores and faces the holes at the same time

  • Conforms to the stringent ANSI Standards

  • Comprises some precision parameters for accurate boring

Cons
  • Potentially clutter your room and workplace

  • Calls for too much care and attention on your part

  • Takes too long to generate the desired boring action

Check Latest Price

#2: BISON SI-MCLN R/L Boring Bars SI-MCLNR 16-4

BISON SI-MCLN

Could it be that the task you have at hand inclines at an angle? You have this set of boring bars for your choice and utilization. It has the capability of incising holes at angles of 80°. Also, it is stronger and very reliable.

Coolant Hole

A coolant hole exists as a vital part and parcel of this boring bar. It is on this hole that you fix in your coolants and attains some tight diameter holes. The hole extends the applicability of the boring bars altogether.

Side Cutting-edge Angle

As noted above, this apparatus is able to bore some holes at an angle of around 80°. This stems from its possession of the side cutting-edge angle. It is this one that makes for inclined use and applications.

1-inch Shank

Lastly comes the 1-inch shank. By virtue of the 1-inch measurement, the shank is comfortably long to allow for easy handling and subsequent engagement later on. It also brings about better outcomes.

Pros
  • Accommodates some inserts and extras

  • Compatible with many kinds of accessories

  • Small and compact enough for easy handling

  • Bores deeper holes on the whole

  • Quite comprehensive in scope and applicability

Cons
  • Disparages a person who is unskilled

  • Has the potential to inflict injuries

  • Impacts fewer surfaces and materials

Check Latest Price

#3: YOYO TOOLS 2pcs 3/8″ SCLCR 1010H06 S10K-SCLCR06 Lathe Tool Holder Boring Bars

YOYO TOOLS

Planning to bore holes on metals as part of the metal lathes? You have this specific boring bars for your use. It contains numerous indexable carbide inserts that enable you to fulfill this role with ruthless efficiency.

Highly Versatile

This set of boring bars is highly versatile indeed. You will find it useful in many environments and circumstances of use. For this reason, it saves time and also accords the peace of mind you need to do a thorough job.

Comprehensive Stature

Next, it does come along in some comprehensive stature. This is made possible chiefly by the wrench that exists to expedite the replacements of the pads and knife blades. Thus, it cuts down the time you would ordinarily tale to complete a task.

Accessories Steel

Lastly comes the accessories steel. It does come along in a good and long life. Stemming from its tough and reliable makeup, this material reduces the costs of using the tool considerably.

Pros
  • Comes about as a comprehensive package

  • Able to accommodate and work hand in hand with many accessories

  • Supports diverse blade sizes which handle numerous kinds of applications

  • Packaged in 3 boxes to allow for easier storage

  • Handles many tasks ‘under one roof’

Cons
  • Demands excess muscle power on your part

  • Unable to bore angular holes

  • Costs a lot more to handle and operationalize

Check Latest Price

#4: Micro 100, BB-2301000G, Right Hand Cutting Radius Boring Tool

Micro 100

Are you a career workman? Get the stress out of your applications by choosing a set of boring bars that is similarly multipurpose. This is the one to set your eyes on. It is suitable for many machining applications which require turning and boring.

Awesome Dimensions

On the whole, this tool possesses awesome dimensions. Its radius is a decent 0.003 inches whereas the cutter diameter is around +0.000 to -0.002 inches. These two guarantees some ultimate precision and topnotch performance.

Higher Speeds and Feeds

Compared to many other apparatus, this one operates at speeds that are higher than average. These two subsequently translate into increased lifespans and reliable performances which work well also in ferrous materials.

Excellent Quality

Also, its quality is excellent in the sense that it can handle higher feed rates. Thanks to this trait, the bars are able to process many holes per unit time. With it in your hands, you will not have to wait for too long to have your way.

Pros
  • Strong and stable boring apparatus

  • Manages both finishing and roughing surfaces

  • Handles the general-purpose coating exceptionally well

  • Does not generate excessive heat levels which are ordinarily disturbing

  • Backed by excellent customer service regime

Cons
  • Only for the experienced workman

  • Quite intricate to get to know about

  • Takes longer to yield the necessary performances

Check Latest Price

#5: Wal Front  Carbide Boring Bars

Wal Front

Searching for some boring bars to use for a longer duration of time? Choose this one! It has the ability to pair and work hand in hand with many accessories. This extends its functionality and ensures long-term reliability.

Wide Boring Capacity

It does have a pretty wide boring capacity. The capacity spans from 10-125 mm. With this wide capacity, you may be sure to handle many surfaces, materials, and textures. You also got to save some of your time.

High-quality Material Makeup

On the whole, the bars feature high-quality material makeup. These materials are resistant to wear and tear, last longer and are truly reliable. You will get to make the most of them in the course of boring holes.

Upgradeable

We have already highlighted that this tool may be used for a longer duration of time. This stems from the fact that it is upgradeable in the sense that it accommodates and works hand in hand with many attachments and accessories.

Pros
  • Bores many parts of a typical material

  • Engraves some grooves on metallic surfaces as well

  • Pretty awesome for the milling machine

  • Handles many extras and accessories

  • Remains in vogue for an extended duration of time

Cons
  • Incomplete and requires many parts to fully operationalize

  • Clutters your workspace considerably

  • Prone to loss and pilferage of parts and components

Check Latest Price

#6: Almhs 1/2″ Shank 9 Pcs Boring Bar Set Carbide Tipped Bars

Almhs

Boring holes through harder materials is never a mean feat. The toughness of the materials prevents the mouths of the drills from performing their tasks. Only a tool that is optimized for that role like this one may offer the required outputs.

C-6 Carbide

It comprises the extra tough C-6 carbide ingredient. This is the component that enables the boring bar to pierce through harder materials with absolute ease and precision. That way, it gives you a fair degree of performance.

0.0000-0.0005-inch Shanks

The shanks of the boring bar measures 0.0000-0.0005 inches in diameter. These are the best dimensions that vouch for utmost performance and awesome reliability at all times of use. They also accord some stability.

Heat-treated Alloy Steel

At its core is the special heat-treated alloy steel makeup. Being strong and resilient, this material subsequently makes the entire structure tougher and more reliable for handling the harder surfaces and substances.

Pros
  • Comes about in nine pieces for comprehensive cover

  • Works equally well in the softer materials

  • Excellent diameter allows for smooth functionality

  • Strong enough to endure the test of time

  • Grooved shank makes for easier handling and controls

Cons
  • Makes you too tired too soon

  • Generates lots of heat in the course of the use

  • Its noise output is similarly higher

Check Latest Price

#7: OSCARBIDE Boring Bars

OSCARBIDE

Looking to turn your internal holes? You have this specific boring holes for your use and consideration. It contains all the trappings needful for the attainment of this goal. Moreover, it is also small and compact enough to fit tight spaces.

Round Shanks

Unlike the many alternative boring bars, this one has round rather than straight shanks. Thanks to this roundness, the shanks are easy to operate. Moreover, they prevent the emergence of long stringer chips.

Carbide Inserts

Its carbide inserts are indexable. In this way, you get the freedom to use another side of it in case one side is too dull to be used anymore. Thus, it assures you of reliable operations at any given time.

High-quality Steel

The material that forms its core is high-quality steel. Adorning this material are some inserts that are coated with tin. Thanks to this coating, the material resists moisture and rust for long-term use.

Pros
  • Stands tall to extreme weather elements

  • Turns the internal holes

  • Possesses replaceable parts for the longevity of use

  • Yields greater returns on investments

  • Retains its stature for a prolonged duration

Cons
  • Only useful for internal holes

  • Too squeaky for comfortable use

  • Strains the hands and fingers considerably

Check Latest Price

#8: Generic 8 PC 3/4″ Shank Indexable Boring Bar Set Free TCMT Insert

Generic 8 PC

Never attempted to bore some holes before? We invite you to choose this simple and straightforward boring bar. It contains only the bare minimum set of features necessary for the accomplishment of a given goal.

Round Shanks

Its shanks are round in shape. As such, they distribute the weight more uniformly not to mention that they are comparatively easier to handle and engage. These enable you to set the positive and the negative rakes easily.

Chip Breaker

A chip breaker also exists in this set of boring bars. The purpose of the breaker is to get rid of the long stringer chips. This way, it lets you handle your boring with absolute ease and maximum efficiency.

New Cutting Edge

The boring bar may also accommodate a new cutting edge if need be. This is achieved principally by indexing the insert. It gives you the leeway to achieve greater heights than you would normally or under ordinary circumstances.

Pros
  • Has enough room for the positive and negative rake

  • Negates the need for longer stringer chips

  • Allows for the insertion of new cutting edges

  • You do not have to detach the tool from the post or chuck

  • Manufactured using the strong carbide steel

Cons
  • Too simple to handle complex chores

  • Breaks down a bit too soon

  • Unsuitable for use on harder materials

Check Latest Price

#9: Everede A12S SCLCL-3 Steel Boring Bar

Everede A12S SCLCL-3

Have some tough components to take care of? Get hold of this boring bar and use it to tackle that very job. It is strong, very reliable, and highly likely to handle the most strenuous chores available out there.

3 Steel Boring Bar

The tool is manufactured using some steel material. On account of this, it is strong, very reliable, and highly likely to handle the most strenuous tasks with absolute ease. This is not to mention the reduced likelihood of sustaining damages.

Hand Steel Boring Bar

At its hand is similarly a steel makeup and construction. For this reason, it is yet again stronger and more reliable. You will yet again enjoy the benefit of reliable operations which are unparalleled by any other tool of this kind.

Excellent Size

On the whole, the boring bar comes in an excellent size indeed. Its diameter is the impressive o.75 inches whereas the shank is long and rounded. These dimensions make for proper operations and unparalleled reliability.

Pros
  • Long enough to handle tough chores easily

  • Made of the tough and powerful steel materials

  • Excellent dimensions simplify the operations thereof

  • Tough enough to handle equally tough jobs

  • Small and compact enough to enable long-term use

Cons
  • Becomes obsolete a bit too soon

  • Cannot accept and work with other accessories

  • Impossible to upgrade with time

Check Latest Price

#10: HHIP 1/2 X 9 X 3/16″ Double END Boring BAR (1015-0502)

HHIP

For tackling your angles and inclinations, no other set of boring bars is as reliable as this one. It does comprise two bars; one inclined at 45° with the other at 90°. These inclinations are the ones that allow for angular use.

Broached Holes

These bars are able to accept carbide tool bits and high-speed steel thanks to the broached holes. This arrangement lets it handle so much more than it would do ordinarily. They further yield higher returns on investments.

Selected Steel

Only the selected steel has been used to make the bars up. Being strong and reliable, steel makes the entire structure equally strong and resilient. They also exude greater strength and added rigidity.

Double-end Boring Bar

A double-end boring bar also comes along as a vital part of this set of equipment. By comprising two ends, this boring bar is twice as effective as the ordinary counterparts. It is also stronger and quite agile.

Pros
  • Inclined at two main angles for ease of use

  • Accepts several attachments and accessories

  • Comprises some black oxide finish

  • Available in many shapes and sizes for your consideration

  • Yields added strength and agility

Cons
  • Takes up much mounting space

  • Clumsy and difficult to carry around

  • Easily predisposes you to fatigue and strains

Check Latest Price

#11: Aloris Tool CXA-41D Boring Bar Holder

Aloris Tool CXA-41D

Some boring undertakings are subjected to intense pressure. You cannot pick and use any boring any equipment randomly as it may not really bear the pressure. We ask you to pick and choose this one for your use.

Precision-ground Bore and Split Clamping Design

The design of this boring bar is in the form of the split clamping and precision-ground bores. They are subsequently great at accommodating the excess clamping pressure which the ordinary bars unable to handle.

Seamless Adjustability

You may adjust the cutting angles either positively or negatively. In doing so, you will end up tackling tasks and applications which you would not do or cannot manage naturally through other means.

Clamping Pressure Endurance

As noted above, this appliance is capable of enduring excess clamping pressure. It is this trait, as a matter of fact, that sets it apart from all the others. This also ensures the utmost performance when things are bad.

Pros
  • Works well under extreme pressure

  • Adjusts appropriately to handle many kinds of roles

  • Retains its weight and stature regardless of the prevailing circumstances

  • Comes in an awesome design which performs well

  • Provides trusted and enduring qualities

Cons
  • The bushings are sold separately

  • Requires frequent repairs and maintenance

  • Can injure you if you handle it recklessly

Check Latest Price

#12: Zerone Shank Lathe Boring Bar Turning Tool

Zerone

Are you undertaking some finishing operations? Make use of this boring bar as it is the one that is exclusively meant for those circumstances of applications. It handles the semi-finishing and finishing operations smoothly.

Premium Quality

In all, the boring bar features some premium quality materials. Moreover, they have also been inspected by reputable third parties which as vouch for their strength and reliability. Expect them to perform better hence.

Reliable & Durable

By all accounts, the boring bars are reliable and durable at the same time. They particularly give off good toughness and hardness when deployed for the job of drilling holes on surfaces. This is not to mention a long service life.

Well-processed

As part of their manufacture, the items are processed well. Some good low-temperature impact toughness is utilized to make up the surface of the bars. They yield greatly improved surface gloss altogether.

Pros
  • Reduces the total costs of grinding

  • Improves the cutting efficiency

  • Handles all finishing related activities

  • Gives off longer service life

  • Exhibits some glossy appearances and shines

Cons
  • Limited applicability (only finishing activities)

  • Cannot accommodate any upgrades

  • Brings about limited returns on investments

Check Latest Price

#13: Ultra-Dex E10Q STFPR2 Carbide Boring Bar

Ultra-Dex E10Q STFPR2

Just in case you have been searching for a set of bars to use for general purposes, we ask that you try your hand on this one. Its material makeup and parts combine to make this feat easily achievable.

Comprehensive Stature

As explained above, this bore has a comprehensive stature. These come in the forms of 0° Lead, coolant thru, positive TPMT, and excellent dimensions. They combine to make your experience awesome.

0.406-inch Length

The distance between the insert and the backside of the tool measures 0.406 inches. This is spacious enough to handle and accommodate many co-operant tools you will need for your job and tasks.

0.76-inch Minimum Bore

Its minimum bore measures a whopping 0.76 inches. This is sufficiently large to leave behind a hole that is deep enough. That it takes less effort to bore contributes to the overall efficiency of the machine.

Pros
  • Accompanied by a spare screw for added convenience

  • Contains all the parts and components necessary for the job

  • Incises deeper holes for less effort

  • Less tiresome to handle and engage

  • Handles many tasks and purposes at a time

Cons
  • Not so great for professional applications

  • Unsuitable for specialized tasks

  • Too clumsy and complicated to handle

Check Latest Price

#14: Z Live Center 2″ Boring Head SET 9 Pcs Carbide Boring Bars with R8 Shank 1/2” Mill

Z Live Center

To save yourself some time and cut down the time you would take to bore the holes, you want a set of bars that comes about with all the parts and features necessary for the job. This is the one to choose to use.

Boring Head Diameter (2 inches)

The diameter of its head is around 2 inches. It is subsequently large enough to bore wider holes yet compact enough to handle smoothly. Thus, it cuts down the time you would take to realize your ends.

Boring Head Height (2-7/16 inches)

Its head measures 2-7/16 inches high. With this height, it is capable of attaining feats and reaching points which are largely beyond the purview of the ordinary boring bars.

Boring Capacity (10-125 mm)

It does have a boring capacity of around 10-125 mm. Thus, when engaged, the bars tend to sink deeper than the others around it. In this way, it gets to areas that are beyond the reach of the ordinary bars.

Pros
  • Comprehensive in scope

  • Multipurpose (handles many tasks comfortably)

  • Accepts many attachments and accessories

  • Remains relevant for a prolonged duration of time

  • Does not falter even when subjected to harsh impacts

Cons
  • Requires some assembly right before use

  • Can easily confuse a person without prior experience

  • Predisposes you to the risks of clutter

Check Latest Price

#15: Dorian S16T-MCLNR-4 Boring Bar

Dorian S16T-MCLNR-4

To be able to do a better job, you want to secure the services of a reputable firm. Dorian is known to produce tools that are tough and resilient to the intense dangers and impacts. Choose and use it for the job.

Negative 5° End Cutting Edge

Its end cutting edge is inclined at an angle of around 5°. This makes it possible to bore the holes that are inclined or at an angle to the horizontal. These definitely make for convenient operations and undertakings.

1.28-inch Minimum Bore

The least depth the bars can bore is 1.28 inches. This is still deep enough for one stroke. It also assures you of saving your time greatly in the course of making good use of the bars altogether.

12.0-inch Overall Length

In its entirety, the bars measure 12 inches long. This means you have greater leeway to bore deeper holes with the bars than you would with other alternative bars at hand. The pleasure of a reduced wastage of time is yours to leverage.

Pros
  • Impressive diameter leads to wider bores

  • Incises holes at angles and inclinations

  • Comes about in some awesome styling and appearance

  • Bores deeper holes in the first attempt

  • Long enough to bore even deeper holes

Cons
  • Requires some prior expertise to handle

  • You have to spend some time to comprehend it

  • Demands complex operational procedures

Check Latest Price

Frequently Asked Questions (FAQs)

What are boring bars made of?

These bars are manufactured using the strongest materials available. Heavy metals, stainless steel, and carbide are top examples of these materials. They have been noted to last longer and endure the test of time.

What is a right-hand turning tool used for?

Taking light roughing cuts as well as handling many all-around machining undertakings. It stands in sharp contrast with the left-hand turning tools which cut whenever they are fed from the left to the right hand.

What is the purpose of boring?

Boring produces smooth and accurate holes in the workpieces chiefly by enlarging those that are already in existence. These, in turn, makes it possible for you to tighten joints, attach accessories, and pair items at a time.

How does a boring operation differ from a turning operation?

Boring yields internal cylindrical shapes whereas the turning yields external cylindrical shapes. Beyond that, they perform more or less similar things and issues. Thus, they only differ with regards to the specific portions of materials they impact.

What is a counterboring operation?

This refers to the enlargement of one end of a pre-existing hole that is concentric with an original hole. The object of this operation is to accommodate the heads of the pins, studs, and bolts.

Leave a Comment