Ignition coils are some of the most important parts of an engine. The role of an ignition coil is to draw voltage from a 12 volts car battery and amplify it into a higher voltage required by the spark plug to ignite the fuel and start the combustion process. Thus, it’s important to have a functional ignition coil at all times.
Just like other car parts, the ignition coil may fail over time. Once it starts failing, you’ll have trouble starting the engine or experience power loss. Your car can also stall in the middle of the road. In case you notice that the ignition coil is failing, you should have it checked for possible replacement.
If the ignition coil is found to be faulty, replace it to get your car on the road again. However, you need to get the right ignition coil for your car. With the right ignition coil, your car will start smoothly and the combustion process will be smooth.
It can be quite challenging to pick out the right coil from the many options available today. Luckily, we have made it easier for you.
- Compatibility: Ignition Coil Pack for 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Toyota Tacoma 4.0 V6 | 2003 2004 2005 2006 2007 2008 2009 Toyota 4Runner 4.0L V6 | 2007-2009 Toyota FJ Cruiser 4.0L V6 | 2005-2011 Toyota Tundra 4.0 V6 |
10 Ignition Coil Reviews
#1. ENA Pack of 8 Curved Boot Ignition Coil
ENA is a leading auto parts manufacturer. The company is known to manufacture premium quality products. The ENA Pack of 8 Curved Boot ignition coils is not any different. These ignition coils are specially designed to fit OE mounting points for simple and quick installation.
The ignition coils meet OE specifications and design standards. Thus, you’re assured of perfect performance in compatible cars. They’re designed to fit in most Ford vehicles with a 4.6L and 5.4L V8 engine and 6.8L V10 engine.
The design behind these coils makes them perform reliably in all operating conditions. They supply enough voltage to the spark plug across all the speed ranges of a car. Thus, they allow the engine to perform optimally.
Additionally, the ignition coils are made with industrial-grade copper for the best performance. Their windings are uniquely designed in such a way that the weight of the coil is kept on the low. The windings are also compact to allow for small-sized ignition coils.
#2. ECCPP Ignition Coils
ECPP designs and manufactures a wide range of automotive parts. Their automotive parts are built with quality in mind. Its ignition coils are among the leading options available today.
These ECCPP ignition coils are designed to replace faulty OE ignition coils. The coils are specially designed to fit it in several Ford Lincoln Mercury, Ford Crown Victoria, Ford Expedition, and Ford Excursion models.
The ignition coils are made of premium quality materials for enhanced reliability and stability. Their design exceeds OEM standards. They’re able to output the energy required for the engine to run smoothly and efficiently.
Another notable feature that comes with these ignition coils is their heat and pressure resistance. Temperature and car vibrations do not affect their performance. Besides, they’re designed to reduce emissions while still increasing the horsepower of your car.
#3. ENA Pack of 6 Ignition Coils
The ENA Pack of 6 ignition coils is yet another great choice for replacing failed ignition coils. These coils are designed to exceed the quality and standards of OE coils. They’re compatible with several Buick Rainier, Chevrolet, GMC Canyon, GMC Envoy, Hummer H3, Isuzu, SAAB, and Oldsmobile Bravada car models.
The coils are designed to fit perfectly in the compatible car models. You’ll install them directly into your car with ease. This makes them suitable for DIY installation.
Additionally, these coils are designed to make your car engine start smoothly. They reduce the crank time and allow for a stronger throttle response. Additionally, they’ll prolong the service life of the catalytic converter.
The ignition coils have undergone intensive testing before they left the factory. Thus, you’re guaranteed of investing in products that’ll serve you reliably during their lifespan.
#4. Bravex 8 Pack Straight Boot Ignition Coils
Bravex is a trusted brand in the world of ignition and fuel systems. These ignition coils from Bravex stand out from other products in that they exceed the performance of OEM coils. They actually offer more energy than OEM coils. Thus, they will greatly enhance the performance of your engine.
The coils boast of having a superb build quality. They’re manufactured using premium quality materials for enhanced reliability. The coils are designed to fit in selected Ford Lincoln and Ford Mercury car models.
Additionally, the coils are designed with innovative technologies including injection molding, welding, and curing for enhanced strength and durability. They also feature multi-spindle winding for enhanced power.
These coils also boast of being made using a highly conductive coil. Thus, the coils will send enough voltage to the spark plug to reduce misfire. Besides, they eliminate hesitations when starting the engine or accelerating. That way, they allow for smooth engine performance.
#5. QYL Pack of 4Pcs Ignition Coil
These QYL ignition coils are designed to exceed OEM standards and performance. Each coil in the pack of 4 outputs a high voltage to eliminate engine misfires. That way, the combustion process is smoothened for enhanced economy on fuel.
Each coil features a solid magnetic core. The magnetic core offers a strong magnetic field that allows the coil to generate high voltage. The primary core is made of thick, premium quality copper wire for longevity. Besides, the secondary coil is made of ETP copper for enhanced conductivity. Thus, the coil is able to send sufficient voltage to the spark plug.
Additionally, the coil features a plated finish that connects to the spark plug. The plating allows it to transfer maximum voltage to the spark plug. It also comes with a flexible high-temperature silicone boot for easier removal.
These ignition coils are design for use with Dodge Attitude 2006 to 2010 models, Hyundai Accent, Kia Rio, and Kio Rio5 2006 to 2011 models.
#6. King Auto Parts Ignition Coil DG508 and Motorcraft Spark Plug
These ignition coils from King Auto Parts are an ideal aftermarket replacement for faulty OE coils. They meet OE specifications for the best performance. The coils fit in several Ford models.
The coils have been subjected to quality control measures for reliability. Besides, they have undergone intensive testing to guarantee optimal performance and efficiency. To add to that, the coils are made of premium grade materials for longevity.
The plug boot in each coil is made of a heat resistant material to operate efficiently under high heat. This makes the coils perform optimally even under heavy load. Additionally, the coils are made to reduce emissions while still outputting high energy.
Another benefit of this product is that it comes as a set of 8 ignition plugs and 8 spark plugs. Thus, you can change all the coils and spark plugs to get an all-new ignition system. That way, you’re assured of smooth engine starts and enhanced engine power.
#7. Delphi GN10571 Pencil Ignition Coil
Delphi manufactures superior quality engine management parts. The Delphi GN10571 ignition coil is engineered to enhance the fuel combustion process. The coil is made with innovative technologies that guarantee optimum reliability.
The coil windings are designed intelligently to control the wire length between the adjacent windings. That way, there’s reduced voltage difference to keep the wire coating and insulation protected from breaking down under pressure.
The coils also feature an electrostatic paint coating that allows for consistent inductance. The paint coating also prevents the lamination from separating. This allows for enhanced insulation power. To add to that, the materials used are of high quality to prevent premature failure.
The epoxy insulation is free of air bubbles, thanks to the vacuuming technique used when applying the epoxy insulation. Reduction in air bubbles enhances the quality of insulation.
Additionally, the coils are designed to meet OE specifications. That way, you’re assured that it will fit perfectly when replacing the OE coil.
#8. Megaflint High Performance Ignition Coil 8 Pack
Looking for a direct replacement ignition coil for your Ford? These ignition coils from Megaflint are specially designed to fit in several Ford E-series and Ford F-series. The coils come as a pack of 8 such that you can replace all of them altogether.
The coils are made using top-grade materials that make them durable and reliable even under heavy load and extreme conditions. Also, the plugs feature a coating that resists abrasion and corrosion.
These coils also come with high-temperature epoxy. The epoxy won’t fail under extreme temperatures. The copper wire used in the coil is of top-grade quality for maximum conductivity.
Another benefit that comes with these coils is that they’re designed to allow the engine to start and run smoothly. That way, the performance of the engine is improved for more power output. Consequently, the engine consumes fuel economically.
#9. AUTOSAVER88 Ignition Coil Pack of 4
AUTOSAVER88 is a leading manufacturer of auto replacement parts. Its ignition coils are made under strict standards. They have been designed for consistent and reliable performance under extreme conditions. Additionally, they have undergone thorough testing for quality control.
The plug boot on the coil features a heat resistant compound. It’s able to withstand extreme heat for prolonged periods. To add to that, the coils meet OEM specifications such that they fit perfectly in the OEM mounting locations.
The coils operate efficiently such that they don’t struggle to generate sufficient voltage. They generate the right voltage for enhanced fuel economy. Consequently, they reduce exhaust emissions. The coils also boast of being mechanically stable for enhanced performance.
They’re compatible with several models of Toyota Celica GT Hatchback, Toyota Corolla VE Sedan, LE Sedan, S Sedan, CE Sedan, Matrix Base Wagon, Matrix XR Wagon, and several Chevrolet Prizm models.
#10. Bosch 0221504470 Ignition Coil
While Bosch is famous for making some of the top quality electronics, it also makes high-performance auto parts, including ignition coils. This pack of 6 Bosch 0221504470 ignition coils are specially made for use with several BMW models.
If your BMW has started misfiring, then these are the right coils for replacement. They’ll keep the engine running smoothly and efficiently. As a result, the engine will be more economical on fuel consumption while still allowing for increased engine power.
All the coil parts are made of premium quality materials for durability. They’re reliable and solve issues such as reduced power and misfiring. Additionally, they exceed OE standards and fit directly without any difficulties.
Frequently Asked Questions
How does the ignition coil work?
The ignition coil draws voltage from the car battery. It amplifies the voltage to levels that are high enough for the spark plug to ignite the fuel and start the combustion process.
What are the signs of a failing ignition coil?
The signs of a failing or bad ignition coil include:
- Problems starting the car- A faulty ignition coil will not supply enough voltage to the spark plug. Thus, fuel can’t be ignited and the engine won’t start.
- The check engine light is on- In case the “check engine light” is on, then you should have the ignition checked for possible failure or other issues.
- The engine is misfiring- A misfiring engine is a problem where the engine produces a coughing noise when trying to start a car. The problem is often associated with a failed coil.
- Vibrations when idling- If your car is vibrating when idling, maybe at a stop sign, then it’s likely that the ignition coil is failing. The engine may also jerk and hesitate when accelerating due to a failing coil.
- The engine stalls- If your car is stalling, it may stop and start abruptly. If it stalls completely, then it’s likely that the ignition coil has failed.
- More fuel consumption- If your car is consuming more fuel for a similar distance than in the recent past, then it’s likely that the ignition coil is failing. In case the spark plugs are not receiving enough voltage, your car will consume more fuel.
How long does an ignition coil last?
A top-quality ignition coil should last approximately 100,000 miles.
Is it safe to drive with a failing ignition coil?
No, it’s not safe to drive with a failing coil. Your car will stall or even damage other parts. Thus, have the coil replaced soonest possible.
Can I replace an ignition coil by myself?
Yes, you can. You can easily learn how to replace it yourself by following online tutorials. However, if you’re not confident enough, have a mechanic replace it for you.
How much will it cost me to replace an ignition coil?
The cost will include the cost of buying the coil and the labor costs incurred if you’re going to hire a mechanic. The cost of an ignition coil differs depending on the brand and quality. Also, different mechanics often charge different rates. Thus, do a comparison depending on your budget without forgetting quality.
What causes the ignition coil to fail?
The main cause of failure is voltage overload, which often results from bad plug wires or bad spark plugs. The coil can also fail as a result of excessive vibration and heat.
Can I repair a bad ignition coil?
You can’t repair a bad ignition coil. You should replace it with a new one.
When should I replace the ignition coil?
Have it replaced as soon as it starts showing signs of failure.
Final Words
The ignition coil plays a major role in starting the car engine and ensuring that the combustion process runs smoothly. Thus, you should replace a faulty ignition coil soonest possible.
Replacing it will allow your car to start smoothly, regain its power, prevent further damages, and prevent it from stalling. Also, remember to consider important factors such as compatibility and quality.
Last update on 2023-05-22 / Affiliate links / Images from Amazon Product Advertising API
